We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Whatley Elysee Brass Full Depth Radiant Gas Fire
In stock
Item No:
SF1-217-000
From
£209.00
- 3.5kW Direct Output
- Open Fronted Gas Fire
- 3 Year Guarantee
The Elysee fret is a modern cast design with horizontal curved bars. It has a slightly bowed profile with wider tapering feet detail which deliberately reduces the size of the ashpan making it a less prominent feature of this design. The ashpan is a separate component and provides access, if applicable, to the controls (model dependent). The Elysee fret is available in: brass (solid brass), brass & black (solid brass), chrome (chrome plated brass), chrome & black (lightweight aluminium), black (lightweight aluminium). The Elysee fret is designed to free stand in front of the fire and frame. The one-piece frame is held in position with magnets (supplied) and depending on the model is available in: brass effect, chrome effect or black.
Model Identifier | Conventional Full Depth Inset Radiant Heater Gas Category/Pressure = I2H(20) |
---|---|
Heat Input Gross (High) | 6.8kW |
Heat Input Gross (Low) | 3.5kW |
Heat Output Gross (High) | 3.8kW |
Heat Output Gross (Low) | 1.9kW |
Direct Heat Output | 3.5kW |
Heat Type | Radiant Heat |
Chimney Flue Compatibility | Pre-Cast (Minimum Size 12,500mm²), Pre-Fabricated - Class 2 (127mm/5" Diameter), Conventional Chimney - Class 1 (178mm/7" Diameter or Greater) |
Control Ignition | Battery-Free Piezo Spark Ignition (Manual - Rotary Control), Battery Spark Ignition (Manual - Fingerslide Control), Battery Spark Ignition (Remote Control) |
Control Location | Low Level - Front - Behind Ash Pan (Manual - Rotary Control), High Level - Right - Side (Manual - Fingerslide Control), Handset (Remote Control) |
Air Vent Required | Not Required |
Manufacturer Guarantee | 3 Years |
Safety Features | Flame & Oxygen Monitoring Device |
Installation Requirement | Gas Safe Registered Installer (Bord Gais - ROI) |
Installation Information | As with any open fire, a fire guard complying with BS 8423 must be used. Fire guards are intended to protect people from falling into a fire, prevent burns and reduce the risk of injury, particularly to young children and the infirm. In addition it is intended to reduce the risk of fire resulting from clothing and/or other flammable materials coming into contact with, or in proximity to, burning fuel and/or hot surfaces. |
Fuel Type | Natural Gas |
Fire Type | Open Fronted |
Installation Type | Inset |
Engine Type | Full Depth Radiant |
Width Outline A | 480mm |
Height Outline B | 595mm |
Depth Outline C | 180mm |
Rear Width Min D1 | 245mm |
Rear Width Max D2 | 375mm |
Rear Height E | 545mm |
Opening Width Min X1 | 375mm |
Opening Width Max X2 | 450mm |
Opening Height Min Y1 | 540mm |
Opening Height Max Y2 | 575mm |
Opening Depth Min Z | 200mm |
Packaging Width | 575mm |
Packaging Height | 670mm |
Packaging Depth | 360mm |
Packaging Weight | 11.5kg |
Rebate Depth | 180mm |
Write a Review
You may also like
-
Whatley Blenheim Full Depth Radiant Gas FireFrom £209.00