We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Grosvenor Blenheim High Efficiency Gas Fire
In stock
Item No:
SF1-403-000
Gas Fire (High Efficiency)
This fire is a high efficiency glass fronted gas fire. It has an efficiency rating of 90% - 100% depending upon the model chosen. High efficiency gas fires are kinder to the environment as you are not wasting as much energy. They are also help to significantly reduce running costs.
Gas Safe Register
This fire must be installed and been serviced annually by a Gas Safe registered installer. For more information about Gas Safe please go to www.gassaferegister.co.uk
Efficiency (90%)
This fire is a high efficiency glass fronted gas fire. It has a class-leading efficiency of 90%. This will help lower your running costs.
Manual - Fingerslide Control
This fire is available in manual - fingerslide control. The fingerslide control allows you to operate the fire from LOW to HIGH and turn the fire ON/OFF. A battery is required. On our inset fires the fingerslide control is located on the top right hand side of the fire so that you don't have to bend down on your hands and knees to control the fire.
Guarantee (3 Years)
This product has a 3 year manufacture guarantee. Please see the terms and conditions of your gurantee in the gurantee section.
Manual - Rotary Control
This fire is available in manual - rotary control. It incorporates a piezo spark ignition which doesn't require a battery and allows you to operate the fire from LOW to HIGH and turn the fire ON/OFF. The rotary control is located at the bottom of the fire, behind the decorative fret (ashpan).
From
£449.00
- 4.1kW Direct Output
- Glass Fronted - High Efficiency
- 3 Year Guarantee
- 90% Efficiency
Extras
-
Extended Guarantee (3YR to 5YR)- Extended Guarantee (3 Year to 5 Year)
- Peace of mind against expensive repair bills
- Quality approved and reliable repair
- Protection for your new fire/s for up to 5 years
- Includes genuine Superior Fires parts
- Approved Gas Safe engineer
£50.00
Grosvenor Glass Fronted Inset Gas Fire
- Multi-flue design - requires a min. fireplace depth of 125mm (+ 20mm debris collection)
- OVERVIEW: Top of the range slimline high efficiency glass fronted inset gas fire
The Grosvenor is a glass fronted inset gas fire designed to fit multiple flue installations. It is compatible with most pre-cast flues, pre-fabricated flue systems (class 1 or class 2 with min. 127mm / 5" diameter or greater) and conventional class 1 brick built chimneys. The multi-flue firebox fits a standard fireplace opening, typically 16" wide x 22" high (please refer to specification - excludes low lintels) and requires a minimum fireplace depth of only 125mm, plus 20mm for debris collection.
The Grosvenor reinvents the traditional flued inset coal-effect gas fire. The discrete glass front helps increase performance by reducing the amount of heat input required while the patented safety draft diverter system increases safety in the event of a flue draft reversal. With an authentic flame picture it is no wonder why our Grosvenor range of gas fires have become our best selling model.
The Grosvenor can be specified in Manual Control (Rotary) or Manual (Fingerslide) and is available with coal fuel bed only.
The Blenheim fret is a classic traditional cast design with ornate vertical bars and delicate form. It features a bowed profile with two decorative finials and is designed to free stand in front of the fire and frame. The Blenheim fret is available in: brass (solid brass), brass & black (solid brass), chrome & black (lightweight aluminium), black (lightweight aluminium). The ashpan is a separate component and if applicable, provides access to the controls (model dependent). The one-piece frame is held in position with magnets (supplied) and is available in either: brass effect, chrome effect or black.
Please note the price is dependent upon the final configuration. Natural gas only.
This information is intended for guidance only. Superior Fires recommends booking a Home Survey to determine the actual chimney or flue specification.
This product is not suitable for primary heating.
| Model Identifier | High Efficiency (Glass Fronted) Inset Fuel Effect Gas Fire Gas Category/Pressure = I2H(20) |
|---|---|
| Heat Input Gross (High) | 5.0kW |
| Heat Input Gross (Low) | 3.5kW |
| Heat Output Gross (High) | 4.1kW |
| Heat Output Gross (Low) | 2.8kW |
| Energy Efficiency Class | C |
| Direct Heat Output | 4.1kW |
| Heat Type | Radiant & Convected Heat |
| Chimney Flue Compatibility | Pre-Cast (Minimum Size 12,500mm²), Pre-Fabricated - Class 2 (127mm/5" Diameter), Conventional Chimney - Class 1 (178mm/7" Diameter or Greater) |
| Control Ignition | Battery-Free Piezo Spark Ignition (Manual - Rotary Control), Battery Spark Ignition (Manual - Fingerslide Control) |
| Control Location | Low Level - Front - Behind Ash Pan (Manual - Rotary Control), High Level - Right - Side (Manual - Fingerslide Control) |
| Air Vent Required | Not Required |
| Manufacturer Guarantee | 3 Years |
| Safety Features | Flame & Oxygen Monitoring Device |
| Installation Requirement | Gas Safe Registered Installer (Bord Gais - ROI) |
| Installation Information | As with any open fire, a fire guard complying with BS 8423 must be used. Fire guards are intended to protect people from falling into a fire, prevent burns and reduce the risk of injury, particularly to young children and the infirm. In addition it is intended to reduce the risk of fire resulting from clothing and/or other flammable materials coming into contact with, or in proximity to, burning fuel and/or hot surfaces. |
| Fuel Type | Natural Gas |
| Fire Type | Glass Fronted - High Efficiency |
| Installation Type | Inset |
| Engine Type | High Efficiency (HE) |
| Width Outline A | 480mm |
| Height Outline B | 595mm |
| Depth Outline C | 125mm |
| Rear Width Min D1 | 280mm |
| Rear Width Max D2 | 395mm |
| Rear Height E | 550mm |
| Opening Width Min X1 | 390mm |
| Opening Width Max X2 | 450mm |
| Opening Height Min Y1 | 550mm |
| Opening Height Max Y2 | 575mm |
| Opening Depth Min Z | 145mm |
| Packaging Width | 575mm |
| Packaging Height | 670mm |
| Packaging Depth | 360mm |
| Packaging Weight | 18.5kg |
| Rebate Depth | 125mm |
Write a Review