DAY RETURNS
INTEREST FREE PAYMENTS
PRICE MATCH PROMISE

Chewton Finsbury Cast Slimline Gas Fire

In stock
Item No:
SF1-021-000
From £219.00
  • 3.2kW Direct Output
  • Open Fronted Gas Fire
From £219.00
Manuals/PDF's Details Specifications Reviews

Chewton Slimline Radiant Inset Gas Fire

  • Slimline Design only requires 110mm (+ 20mm debris collection)
  • Fits almost any chimney or flue type (standard opening - excludes low lintel)
  • Open fronted for increased realism
  • OVERVIEW: Good entry level slimline gas fire that will fit almost any chimney or flue

The Chewton slimline radiant inset gas fire is one of our most popular models thanks to it's slimline design and affordable price point. It is designed to fit virtually 99% of any modern pre-cast flues, pre-fabricated flue systems (class 1 or class 2 with min. 127mm or 5" diameter) or conventional chimneys. The slimline firebox fits a standard opening, generally 16" wide x 22" high (please refer to product specification). Most importantly this fire only requires a fireplace depth of 110mm plus 20mm for debris collection.

The Chewton provides sufficient heat to warm a medium sized room within a modern home. This fire can be specified with coal or pebble effect fuel bed and is available in either Manual (Rotary), Manual (Fingerslide) or Remote Control. It does not require a mains power supply however, the Manual (Fingerslide) and Remote options require a battery (supplied) for ignition only.

The Finsbury Timeless premium solid cast frame is a stunning classic design with ornate detailing. The distinct fret includes two prominent piers decorated by ornate finials. The decorative ashpan with distinct pattern work is located in position by discrete fixings in the frame and when removed allows access, if applicable, to the controls (model dependent). The Finsbury has been manufactured using traditional sand casting techniques. Therefore naturally some minor imperfections such as pitting and black residual polishing marks may be visible, although this is a direct result of the production and finishing process and is intentionally employed to achieve the authentic appearance. The Finsbury is available in polished cast iron or black finish.

Please note the price is dependent upon the final configuration. Natural gas only.
This information is intended for guidance only. Superior Fires recommends booking a Home Survey to determine the actual chimney or flue specification.

This product is not suitable for primary heating

 

More Information
Model Identifier Conventional Slimline Inset Radiant Heater Gas Category/Pressure = I2H(20)
Heat Input Gross (High) 6.2kW
Heat Input Gross (Low) 3.5kW
Heat Output Gross (High) 3.1kW
Heat Output Gross (Low) 1.8kW
Direct Heat Output 3.2kW
Heat Type Radiant Heat
Chimney Flue Compatibility Pre-Cast (Minimum Size 12,500mm²), Pre-Fabricated - Class 2 (127mm/5" Diameter), Conventional Chimney - Class 1 (178mm/7" Diameter or Greater)
Control Ignition Battery-Free Piezo Spark Ignition (Manual - Rotary Control), Battery Spark Ignition (Manual - Fingerslide Control), Battery Spark Ignition (Remote Control)
Control Location Low Level - Front - Behind Ash Pan (Manual - Rotary Control), High Level - Right - Side (Manual - Fingerslide Control), Handset (Remote Control)
Air Vent Required Not Required
Manufacturer Guarantee 3 Years
Safety Features Flame & Oxygen Monitoring Device
Installation Requirement Gas Safe Registered Installer (Bord Gais - ROI)
Installation Information As with any open fire, a fire guard complying with BS 8423 must be used. Fire guards are intended to protect people from falling into a fire, prevent burns and reduce the risk of injury, particularly to young children and the infirm. In addition it is intended to reduce the risk of fire resulting from clothing and/or other flammable materials coming into contact with, or in proximity to, burning fuel and/or hot surfaces.
Fuel Type Natural Gas
Fire Type Open Fronted
Installation Type Inset
Engine Type Slimline Radiant
Width Outline A 480mm
Height Outline B 595mm
Depth Outline C 110mm
Rear Width Min D1 215mm
Rear Width Max D2 350mm
Rear Height E 545mm
Opening Width Min X1 350mm
Opening Width Max X2 450mm
Opening Height Min Y1 540mm
Opening Height Max Y2 575mm
Opening Depth Min Z 130mm
Packaging Width 640mm
Packaging Height 715mm
Packaging Depth 410mm
Packaging Weight 20.5kg
Rebate Depth 110mm
Write a Review
Your Rating